This week we are making a sign for Father’s Day sponsored by Heat Transfer Warehouse.

- Chalk Paint
- Cricut Easy Press Mini
- Chalk Paint Varnish
- HTV – Heat Transfer Vinyl
- Dads Tool Rules SVG
- Squeegee
- Teflon Sheet
Let’s Craft!
Step 1: Paint all your frame pieces I choose gray frame and white background.
Step 2: Cut all your HTV and weed.
Step 3: Turn on your Cricut Easy Press Mini to Medium heat 25-30 seconds.
Step 4: Place and center the HTV design on the board. With medium pressure and constant motion 5-10 seconds in each spot to adhere the HTV.
center your design burnish with a squeegee press onto wood slowly peel up carrier place teflon and press again
Step 5: Varnish your HTV and Chalk paint board, I always heat set my boards after paint and varnish.
varnish your board heat set
Step 6: Ask your husband to nail gun the boards to the frame without looking haha!
If you enjoyed this Make It Monday then subscribe to my blog on the RIGHT hand side and get blog emails sent right to your mailbox.

Any questions leave a note in the comments section below. Thanks!